Chaowei garnet sand tell you the difference in water jet and jet of abrasive waterjets

Water, also known as water jet cutting, is a kind of using high pressure water cutting machine. Under the control of the computer, the workpiece can be cut and cut arbitrarily, and it is affected by the material texture. Because of its low cost, easy operation, good quality and high yield, water cutting is becoming the mainstream cutting method in industrial cutting technology.

Water jet []

Water jet cutting method is the earliest water. The first commercial application began in the mid 1970s and was used for cutting corrugated cardboard. Application of water jet cutting is the largest disposable diapers, paper and automotive interiors. For cotton and disposable diapers, compared with other technologies, leaving the technology of water jet on the material at least water. In some diapers or tissue paper factory, unplanned downtime for other cutting technology is very common, the cost of more than $20000 per hour. The water is to provide year-round and continuous operation of maintenance operation can be incorporated into the production process for this application.

Sand water jet []

Sand water and pure water jet only a few different. In the pure water jet, by supersonic flow erosion material. In the sand in the water, sand particles accelerated by water jet, then these particles (rather than water) erosion material. The ability of abrasive waterjets than pure water jet powerful hundreds of times. Water jet and abrasive waterjet are useful. Water jet cutting of soft material, and abrasive waterjet cutting hard material, such as steel, stone, ceramic and composite materials. Abrasive waterjet cutting hardness using standard parameters can be equal to (or even slightly more than) (often referred to as bauxite, alumina ceramic material AD 99.9).