The basic description of water jet cutting with garnet sand jet

Water jet sand has many kinds of way, such as: water jet cutting sand, water special sand, special sand, water jet machine garnet, garnet sand, a water jet sand, a water jet sand, sand water jet cutting machine universal and so on, the main use of the mesh size of 60 mesh, 80 mesh and 120 mesh.

Product model: 60# (0.212-0.5mm), product uses: stone, rubber, wood. The cutting effect: suitable for high-speed cutting applications, can improve the cutting speed of up to 30%, but at the cost of reduced cutting accuracy

Product model: 80# (0.15-0.355mm), product uses: carbon steel, stainless steel, aluminum, titanium. The cutting effect: the most commonly used water jet cutting abrasive grain, can achieve perfect balance in terms of cutting speed and cutting precision.

Item number: 120# (0.1-0.2mm). Product uses: glass, semiconductor. The cutting effect: to meet the high accuracy, low requirement of cutting tolerances.

The cutting surface can be divided into 5 grades according to the figure shown. The first cutting surface is the most smooth, and the five cutting surface is the most rough. When cutting the thinner material, the cutting time required to reach the five cutting surface is usually 3 times that of the first cutting surface. However, to cut a thicker hard material, it takes nearly 6 times as much time to cut the surface of the five cutting surface as it takes to reach the primary cut surface. For example, in cutting 10cm thick aluminum plate, if you only need to reach level five cutting surface effect, cutting speed is about 4.2ipm (107mm/min), but if you need to cut surface at a level surface cutting effect, cutting speed needs to be reduced to about 0.72ipm (18mm/min). In addition, the garnet sand is a kind of natural mineral water, garnet sand hardness produced in different regions will have a larger difference, water jet sand manufacturers machining process and consider the defective market quality is uneven, the advantages and disadvantages of different sand jet. Inferior water sand would seriously reduce the cutting efficiency, resulting in increased time cost, greatly reduce the actual profit to you. So when selecting water sand raw materials must carefully choose garnet sand suppliers. The actual water jet cutting speed and surface quality and water quality of sand such as hardness, purity, water quality itself also has a great relationship.